ROCKA: AVAILABLE |
ROCKA-008M
HIGH GLOSS MAYDAY METALLIC BURGUNDY RED FINISH, ONE PIECE MAHOGANY BODY, ½ INCH MAPLE TOP, 3 PIECE SAPELLE NECK, MAKASSAR EBONY FINGER BOARD, SKYWAY BRIDGE, CUSTOM 5 BRIDGE PICK UP, ‘59 NECK PICK UP, CUSTOM SOFT CASE, TOOL ADJUSTMENT SET
CALL FOR PRICE
CLICK IMAGE TO SEE MORE PHOTOS
TO PURCHASE CALL 310‐430‐2794 OR EMAIL .(JavaScript must be enabled to view this email address)
ROCKA-001FG
HIGH GLOSS FLEX STAIN FINISH, ONE PIECE MAHOGANY BODY, ½ PREMIUM INCH MAPLE TOP, 3 PIECE SAPELLE NECK, MAKASSAR EBONY FINGER BOARD, FIXED BRIDGE, WCR GODWOOD BRIDGE PICK UP, WCR CROSSROADS NECK PICK UP, CUSTOM SOFT CASE, TOOL ADJUSTMENT SET
CALL FOR PRICE
CLICK IMAGE TO SEE MORE PHOTOS
TO PURCHASE CALL 310‐430‐2794 OR EMAIL .(JavaScript must be enabled to view this email address)
ROCKA-002XG
HIGH GLOSS BLACK XENIA STAIN FINISH, ONE PIECE MAHOGANY BODY, ½ INCH PREMIUM MAPLE TOP, 3 PIECE SAPELLE NECK, MAKASSAR EBONY FINGER BOARD, SKYWAY BRIDGE, CUSTOM 5 BRIDGE PICK UP, ‘59 NECK PICK UP, CUSTOM SOFT CASE, TOOL ADJUSTMENT SET
CALL FOR PRICE
CLICK IMAGE TO SEE MORE PHOTOS
TO PURCHASE CALL 310‐430‐2794 OR EMAIL .(JavaScript must be enabled to view this email address)
ROCKA-004H SOLD
DEMO MODEL - $1800 OFF MSRP
HONEY PALE GOLD SATIN FINISH, ONE PIECE MAHOGANY BODY, ½ INCH MAPLE TOP, 3 PIECE SAPELLE NECK, MAKASSAR EBONY FINGER BOARD, SKYWAY BRIDGE, WCR GODWOOD BRIDGE PICK UP, WCR CROSSROADS NECK PICK UP, CUSTOM SOFT CASE, TOOL ADJUSTMENT SET
CLICK IMAGE TO SEE MORE PHOTOS
CALL FOR PRICE
TO PURCHASE CALL 310‐430‐2794 OR EMAIL .(JavaScript must be enabled to view this email address)
ROCKA-006XS
SATIN XENIA BLACK STAIN FINISH, ONE PIECE MAHOGANY BODY, ½ INCH PREMIUM MAPLE TOP, 3 PIECE SAPELLE NECK, MAKASSAR EBONY FINGER BOARD, FIXED BRIDGE, CUSTOM 5 BRIDGE PICK UP, ‘59 NECK PICK UP, CUSTOM SOFT CASE, TOOL ADJUSTMENT SET
CALL FOR PRICE
CLICK IMAGE TO SEE MORE PHOTOS
TO PURCHASE CALL 310‐430‐2794 OR EMAIL .(JavaScript must be enabled to view this email address)
This document is also available as a downloadable/printable pdf.
To download - load the Rocka How To pdf then choose file—>save page as.
PICKUP SELECTION SWITCH
BRIDGE POSITION = BACK PICKUP.
MIDDLE POSITION = BOTH PICKUPS.
NECK POSITION = FRONT PICKUP.
SINGLE COIL TAP
TO SINGLE COIL TAP THE HUMBUCKER “PULL UP”
USING THE SPERZEL TUNER
To insert a string, turn the thumb wheel counter-clockwise just a few full turns to loosen up the mechanism. FYI - if you turn it to much, the wheel will come off and a pin will fall out. If so, simply replace the pin and then the wheel.
GUITAR PICKUP HEIGHT ADJUSTMENT
ADJUSTING ON THE PICKUP
TAKE YOUR SUPPLIED 5/32 ALLEN DRIVER
TURN THE CENTER BUTTON HEAD SOCKET CLOCKWISE TO RAISE THE PICKUP
ADJUSTING ON THE PICKGUARD
TAKE YOUR SUPPLIED 5/32 ALLEN DRIVER
TURN THE CENTER BUTTON HEAD SCOKET CLOCKWISE TO RAISE THE PICKUP
To adjust the truss rod system
Itʼs unlikely you will need to adjust your truss rod, as it is set at the workshop and can stay locked in for years to come. On occasion during global shipping from one climate to another the neck may move on its own due to Mother Nature. If she decides to move the water molecules around in the wood simply follow these simple steps to accommodate her.
1. Take a #3 fat tip Phillips screw driver (not included) and unscrew the center plug. This is just a cover for the hole.
2. DO NOT touch the other 4 screws, they are there to keep the neck on.
3. Place your screws far to the side.
Take your 5/32 allen driver from your supplied tool kit.
4. With some good light take a peak into the hole and you will see an allen head screw about 1 inch deep.
5. Insert your driver into the hole carefully and put a little force on it as you are wiggling the driver so that you can feel it slip into the allen head. You’ll know when it slips it.
6. DO NOT turn the driver more than 1 full turn from its natural position.
7. Forward bow turn clock wise
8. Backward bow turn counter clock wise
9. Neck adjustments MUST be done while the instrument is under string tension and in tune.
10. You may have to wiggle the drive a little when pulling it out of the hole.
11. Re insert your #3 phillips screw plug and only tighten snug. DO NOT over tighten to prevent cracking the paint around the countersink hole.
STEP #1
unscrew the center plug
STEP #2
REMOVE CENTER PLUG
STEP #3
CAREFULLY INSERT DRIVER THEN PUSH DOWN A LITTLE AND FEEL IT LOCK IN
HOW THE ‘STRESS FREE’ TRUSS IS ASSEMBLED
This is a look at the “Stress Free” truss bar and the solid bell brass nut mount.
The truss bar is epoxied into the headstock to absorb string tension.
Truss bar and headstock separate from the neck and nut mount.
WHAT IS THAT HOLE DOING IN THE NECK?
This is the pin hole and is AN ESSENTIAL part of the neck assembly. This hole has NO user function and should not be touched.
► Price: STARTING AT $4350 - CALL 310-430-2796
► Type: ROCKA - six string electric solid body guitar
► Body: One piece - African Mahogany - CHAMBERED
► Top: ONE OR Two piece North American Maple.
► Neck/Headstock: Three piece—African Sapelle,—25.5” scale.—Bolt on.
► Thin/medium neck: .765 @ the nut, .850 @ 8th fret, .875 @ 16th fret x 1.7 width
► Fingerboard: Compound radius 10” to 14”—Black Makassar Ebony with aluminum dots.
► Frets: 24—nickel silver – (Thin/Medium fret wire) width= .084”, crown=.039”, tang= .055”
► Nut/width: Bell brass mount with Ryton nut—1.7”
► Nut material: Mixture of Graphite and Glass made exclusively for HenMAN GUITARS
► Weight: LIGHT to MEDIUM with average of 6.9 -7.9 lbs
► Length: 41”
► Thickness: 1.7”
► Upper bout: 11”
► Lower bout: 13”
► Bridge: TonePro tailpiece and intonation, Bigsby B5 or Skyway.
► Tuners: Exclusive Sperzel locking with distinctive custom henman cylindrical tuning keys.
► Electronics: 3 way toggle switch, one 550k master volume with push/pull TO boost gain, one master 500k Push/Pull tone pot to tap humbuckers into single coils. Exclusive custom made wiring and capacitors. Pots are hand made with brass interiors. Output jack and switch are custom made. Cutting edge 99.5% copper electronic shielding paint.
► Pickups: seymour duncan ‘59 at the neck and a custom 5 at the bridge with true vintage nickel silver covers. 5 PIN CONNECTOR SYSTEM FOR EASY AND FAST PICKUP CHANGES. more Selected Seymour Duncan, WCR, Lollar and Fralin pickups also available.
► Hardware: All hardware is exclusively machined 6061 aluminum and clear coat anodized.
► Strings: THOMASTIK-INFELD POWER BRIGHTS - REGULAR BOTTOM .010 to .045 - MADE IN AUSTRIA
► Gig bag: Mono “Wingman”
► Strap: Genuine leather with strap locks
► Options: 20 different finishes, Bigsby TREMOLO, SKYWAY TREMOLO, TONEPRO TAILPIECE, pickguard, FLAME OR QUILTED MAPLE TOP, PICKUP CHOICES, hard case
► CUSTOM HARD CASE.
► Created:SANTA CRUZ CALIFORNIA USA
Henman Guitars are the fusion of minimalism, craftsmanship, art, and old school quality. We have created instruments for the guitarist who can truly appreciate handcrafted masterpieces.
The ROCKA is absolutely exquisite. The design is unique and spectacular, but what really makes this guitar stand out is its playability and tone. The tappable pickups offer a range of tones not often found on a single guitar. Before plugging the ROCKA into an amplifier, strumming the instrument acoustically you will immediately notice that it resonates through its body into yours like no other guitar you have played. This is the true test of a great guitar.
The body is one piece African Mahogany with a figured North American Maple top. The 25.5” scale neck is 3-piece African Sapele with a figured Makassar Indonesian Ebony fingerboard. The three piece neck is a unique tension-free design created to remove tension from the neck allowing the guitar to resonate like no other. String tension is lessened by up to 80% over traditional guitars. Truss bar adjustments, while rarely necessary, are cleverly performed by removing a plug on the back of the guitar and simply inserting a supplied allen driver and making minimal turns in the desired direction.
PRICES STARTING AT $4350 INCLUDING CUSTOM MONO SOFT CASE AND TOOL SET
PHOTOS
CUSTOM MONO SOFT CASE & CUSTOM BLACK LEATHER STRAP
TOOL SET
WORKSHOP PHOTOS
OPTIONS
FIXED BRIDGE, CUSTOM FINISHED SKYWAY TREMOLO OR AUTHENTIC B5 BIGSBY TREMOLO
CUSTOM HENMAN BLACK LEATHER STRAP
CUSTOM HARD CASE
PICKUPS
seymour duncan ‘59 NECK PICKUP
seymour duncan custom 5 BRIDGE PICKUP
NEW 5 PIN CONNECTOR SYSTEM ALLOWS YOU TO CHANGE PICKUPS EASILY AND QUICKLY
more SELECTED SEYMOUR DUNCAN, WCR, LOLLAR AND FRALIN PICKUP OPTION CHOICES ALSO AVAILABLE OR SUPPLY YOUR OWN FAVORITES AND WE’LL INSTALL THEM FOR YOU
TOP WOODS
PLAIN MAPLE, FLAME AND QUILTED MAPLE
FINISHES - SATIN STAIN, HIGH GLOSS STAIN, HIGH GLOSS SOLID OR SATIN PALE GOLD & ALUMINUMc
STAINS:
SOLIDS:
QUOTES:
“HENMAN GUITARS POSSESS BEAUTY. OF DESIGN. TONE. CONSTRUCTION. SOMETHING RARE IN AN UNCARING UGLY WORLD” – VERNON REID, LIVING COLOUR
“The ROCKA I tried at this companyʼs poshly decorated NAMM booth played beautifully and sounded incredibly clear and ringing. Every aspect of this guitar has been rendered with a great deal of care and precision to create a one-of-akind instrument that straddles the line between music-making tool and piece of fine sculpture.” - Art Thompson
“Henmanʼs ROCKA & MOD guitars are some of the finest, most dynamic rock guitars ever to pass through our hands. They are simply explosive sounding when played through any level of gain or grit, from tweed to modern metal. These guitars shine. They project clarity, power and authority and set a new standard.” - Cliff Cultreri
“ALL THE COMFORT, CRAFTSMANSHIP AND FAMILIARITY OF A GREAT VINTAGE GUITAR WITH THE BEST AVAILABLE TECHNOLOGY OF TODAY. A SUPERB ROCK MACHINE” – CRAIG BARTOCK, HEART
“F**KIN’ BRILLIANT!” – STEVE CRADOCK, PAUL WELLER BAND
click below to watch ROCKA demo video